Motorola CPU32 User's Guide download pdf (Page 58)

To connect the HP E3458A Processor Probe

The processor probe allows you to halt execution, download code (if the

target is RAM based), read/write memory and registers, and step through

software. The HP E3458A also provides a connector to source-level

debuggers, which are available from a number of vendors. Refer to the

HP E3458A Data Sheet for a list of supported debuggers.

To connect the processor probe to the preprocessor interface, use the

following procedure.

Turn off power. Refer to Power-On/Power-Off Sequence in Chapter 1.

2 Connect the 50-pin cable to the processor probe. Then connect the

other end of the cable to the 50-pin connector on the preprocessor

interface. The connectors are keyed.

3 Turn on power. Refer to Power-On/Power-Off Sequence in Chapter 1.

To connect the HP 16505A Prototype Analyzer

Refer to the HP E3458A Processor Probe User’s Guide for instructions on

connecting to the HP 16505A Prototype Analyzer.

Chapter 2: Hooking up Your System

To connect the HP E3458A Processor Probe

E2480A Motorola CPU32 Preprocessor Interface 2–39

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 106 107

No comments

Motorola CPU32 User's Guide Page 58