Motorola WPS870G User Manual download pdf (Page 59)

WPS870G User Guide

PAGE 52

Checking Your Network Protocols (Windows 9x)

Your computer must have either TCP/IP or NetBEUI protocols installed. All versions of

Windows after Windows 95 already have TCP/IP installed by default. You must verify that

the desired protocols are available, as follows:

1 From your computer, click Start > Settings > Control Panel > Network. You should

see a window similar to the following:

– The top line in the list (NetBEUI -> PCI Fast Ethernet Adapter) indicates that the

NetBEUI protocol is installed on this computer. Your computer will show the name of

your Network card rather than "PCI Fast Ethernet Adapter".

– The highlighted line (TCP/IP -> PCI Fast Ethernet Adapter) indicates that TCP/IP is

installed. Your computer will show the name of your Network card rather than "PCI

Fast Ethernet Adapter".

2 If neither protocol is present:

– Install the NetBEUI protocol by selecting Add > Protocol > Microsoft > NetBEUI >

OK. You may be prompted for your Windows CD-ROM.

– If required, you can also install TCP/IP. However, depending on your LAN

environment, TCP/IP may require further configuration.

3 If either protocol is already installed, proceed with installation.

1 ... 58 59 60 ... 115

No comments

Motorola WPS870G User Manual Page 59