Motorola WPS870G User Manual download pdf (Page 47)

WPS870G User Guide

PAGE 40

The printers attached to the WPS870G are displayed along with basic information.

Click Refresh to update the status of the printers.

Network Settings

Network Settings allows you to change how you want to log on to the WPS870G.

Network Setting

Click Network Settings to access the window. The Network Settings window is displayed:

You have two options at this point, either DHCP or Set IP Address. If you are using a router

with a DHCP server that has assigned an IP address to the WPS870G, then select DHCP.

Motorola recommends this approach because there is less management involved.

Otherwise, select Set IP Address and type the necessary information.

Item Description

IP Address

Type the IP address you want to assign to the WPS870G. If you

require assistance in determining a static IP address, refer to

Before

You Begin, a Choice.

Subnet Mask

A subnet mask specifies a particular IP network or a host within a

sub-network. If you have a router, type the Subnet mask for the

segment to which the Wireless Print Server is attached, most likely

255.255.255.0.

1 ... 46 47 48 ... 115

No comments

Motorola WPS870G User Manual Page 47