Motorola MOTOTRBO SYSTEM PLANNER Specifications Page 176

  • Download
  • Add to my manuals
  • Print
  • Page
    / 221
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 175
System Design Considerations 167
November, 2008
4.6.3.2.4.2Required Bandwidth Calculations While Utilizing a Secure Virtual
Private Network
As was discussed in previous chapters, peer-to-peer communications over the network are
optionally authenticated and are also encrypted end-to-end if enabled in the radios. See “Voice
and Data Privacy” on page 62. If this is not considered sufficient for a particular customer, IP Site
Connect supports the ability to work through a Secure Virtual Private Network (VPN). Secure VPN
is not a function of the IP Site Connect device but rather of the router. It is important to note that
Secure VPN does add the need for additional bandwidth and may introduce additional delay.
For a quick reference, the graphs below show the required bandwidth for the two previously
discussed simple IP Site Connect system configurations, but in this case utilizing routers with
Secure VPN enabled and repeater Authentication Disabled. When utilizing Secure VPN routers,
repeater authentication is not necessary since the Secure VPN utilizes its own authentication. As
can be seen, the bandwidth requirements per device increase substantially. This should be taken
into account when planning for bandwidth.
The following parameters should be used in the previous equation to calculate the bandwidth
requirements of each device in the system when secure VPN in the routers is enabled and
repeater authentication is disabled.
BWVC = 23 kbps = Bandwidth required to support Wide Area Voice or Data with Secure VPN
BWLM = 5 kbps = Bandwidth required to support Link Management without authentication
BWIR = 4 kbps = Bandwidth required to support Master Messaging
BWRD = 64 kbps = Bandwidth required to support RDAC commands
NOTE: The preceding data was compiled using the Linksys EtherFast Cable/DSL VPN Router
with four-port switch. Model: BEFVP41. Other routers using different algorithms may yield
different results.
600
500
400
300
200
100
0
2 4 6 8 10 1412
Bandwidth Required vs Number of Repeaters
( 2 Wide Area Channels, with RDAC, Secure VPN )
Uplink / Downlink Bandwith ( Kbps )
Number of Repeaters
700
800
Master
Non-Master
600
500
400
300
200
100
0
2 4 6 8 10 1412
Bandwidth Required vs Number of Repeaters
( 1 Wide Area Channel, with RDAC, Secure VPN )
Uplink / Downlink Bandwith ( Kbps )
Number of Repeaters
700
800
Master
Non-Master
Page view 175
1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 220 221

Comments to this Manuals

No comments