Motorola HT1550-XLS User's Guide download pdf (Page 58)

English

PHONE

MAKING A PHONE CALL D

THROUGH A CONVENTIONAL

SYSTEM

To initiate a phone call:

Press the preprogrammed Phone button, and

skip to step 5.

–or–

Press the PTT button, and if the Hot keypad

feature has been programmed by your dealer,

do the following:

5 Press and Release the PTT button.

• If phone access is successful, a dial tone

sounds.

• If phone access is unsuccessful, a low-

pitched alternating tone sounds. Discon-

nect the call (see step 8) and try again.

Enter the phone number with the keypad. The

number is automatically sent without pressing

the PTT button again.

–or–

m to select a

number from the

phone list.

Press and release the PTT button again to

send the number.

7 Hold the radio in a vertical position with the

microphone 1 to 2 inches (2.5 to 5 cm) away

from your mouth. Press the PTT button to talk;

release it to listen.

8 To disconnect the phone call:

Press and hold ( to exit Phone.

D no longer appears on the LCD.

XXX-XXX-XXXX

1 Select a conventional zone and channel that

have been programmed for telephone.

2 ) to enter menu mode.

m until

4 ) to select

D appears on the LCD screen when you are

in Phone Mode.

Phone

07_Phone.fm Page 56 Wednesday, August 3, 2005 3:26 PM

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 95 96

Comments to this Manuals

No comments

Motorola HT1550-XLS User's Guide Page 58

Comments to this Manuals

Related products and manuals for Two-way radios Motorola HT1550-XLS