Motorola MTP850 User's Guide download pdf (Page 58)

Receiving a Group Call in Idle Screen with Scan On

With Scan On, you can receive a group call

from the scan list you set up, in addition to

receiving a group call from the selected

talkgroup or from the associated ATG.

Receiving the scan call functions as receiving

an associated ATG or selected call in scan off

is possible, except for the following:

• The terminal sounds a tone as explained in the note below.

• To block reception of a Group Call, select Optns then

Block. Powering off/on the terminal unblocks the reception

of this Group Call.

Receiving a Group Call during an On-going Group Call

Depending on how the Service Provider has configured

incoming calls, the incoming call will either be:

• Forced upon you and will interrupt the on-going call (if the

incoming call has higher priority than the on-going call).

• Presented to you (if it has higher priority

than the on-going call).

• To accept the call, press

Join.

• To cancel the call, press End.

Receiving an Emergency Group Call

For detailed information, see page 36.

Receiving a Broadcast Call

For detailed information, see page 37.

• When receiving a High Priority Group Call, you will hear a

“High Priority Group Call” tone (if configured by your Service

Provider).

• When receiving a Group Call from your scan list, which is not

from a High Priority Group, you will hear a “New Group Call”

tone (if configured by your Service Provider).

Group In Use

TG4

ID: David

Optns End

Group In Use

TG4

ID: David

Join End

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 213 214

No comments

Motorola MTP850 User's Guide Page 58