Motorola V323i Service Manual download pdf (Page 32)

32 October 02, 2006 6809507A01-O

Disassembly V323i/V325i

Removing and Replacing the External Display

1. Remove the battery cover, battery, antenna, rear housing, transceiver board,

keypad, flip assembly, flip lens, flip cover and flip assembly shield as described

in the procedures.

2. Using the disassembly tool lift up the display flex connector latch and

disconnect the external display flex from the flex connector (see Figure 18)

3. Using the disassembly tool carefully pry up the external display from main

display assembly.

4. To replace, insert the external display flex into the display flex connector and

press the flex connector latch closed.

5. Replace the flip assembly shield, flip cover, flip lens, flip assembly, keypad,

transceiver board, rear housing, antenna, battery, and battery cover as

described in the procedures.

The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when

handling.

Exercise extreme care when prying up the external display. Breaking the glass

display could cause injury.

050869o

Figure 18. Removing the External Display.

Flex Connector Latch

Disassembly Tool

External Display

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 47 48

No comments

Motorola V323i Service Manual Page 32