Motorola V323i Service Manual download pdf (Page 31)

6809507A01-O October 02, 2006 31

Level 2 Service Manual Disassembly

Removing and Replacing the Flip Assembly Shield

1. Remove the battery cover, battery, antenna, rear housing, transceiver board,

keypad, flip assembly, flip lens and flip cover as described in the procedures.

2. The shield is secured to the flip assembly by 4 plastic latches. Insert a small

flat blade screwdriver directly under the latch slot and gently pry up to

disengage the latch.

3. It is only necessary to disengage 2 of the 4 latches to remove the flip assembly

shield from the flip assembly.

4. To replace, place the flip assembly shield onto the flip assembly.

5. Replace the flip cover, flip lens, flip assembly, keypad, transceiver board, rear

housing, antenna, battery, and battery cover as described in the procedures.

050868o

Figure 17. Removing the Flip Assembly Shield.

Flip Assembly Shield

Small Screwdriver

Shield Latches

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

No comments

Motorola V323i Service Manual Page 31