6809507A01-O October 02, 2006 23
Level 2 Service Manual Disassembly
4. Carefully use the disassembly tool and gently bend the housing latches
outward starting from the right side of the rear housing to release the four
snaps on the sides of the housing (See Figure 7).
5. When all four snaps have been released, carefully lift the rear housing away
from the phone.
6. To replace, align rear housing to the phone.
7. Carefully press the rear housing starting from the left side into the phone until
all of the the snaps engage.
8. Insert and tighten the four housing screws to a torque setting of 1.5 ± 0.2 in-
lbs. Replace the two screw caps.
9. Replace the antenna, battery, and battery cover as described in the procedures.
050878o
Figure 8. Disconnecting the Housing Latches
Latches
Latches
Disassembly Tool
Comments to this Manuals