Motorola MC909X User's Guide Page 193

  • Download
  • Add to my manuals
  • Print
  • Page
    / 252
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 192
Accessories 6 - 15
Cable Adapter Module
This section describes how to set up and use the snap-on CAM with the mobile computer. The CAM snaps on
to the bottom of the mobile computer and can be easily removed when not in use.
Figure 6-14
Cable Adapter Module
When attached to the mobile computer, the CAM can perform the following functions.
Provides power for operating the mobile computer, with the appropriate power connection.
Provides serial connection through the serial pass-through port for communication with a serial device,
such as a host computer.
Provides USB connection through the USB pass-through port for communication with a USB device,
such as a host computer.
Charges the mobile computer’s battery, when used with the appropriate power supply.
Latches
Power Port
Communications Port
Pogo Pin Pass-through
Connector
Latch Grip
CAUTION Use only a Symbol approved power supply output rated 12 VDC and minimum 3.3 A. Use of an
alternative power supply will void the product warranty and may cause product damage. See
Appendix C, Regulatory for the power supply regulatory compliance statement.
NOTE When a mobile computer with Windows Mobile 5.0 is connected to a host computer through the CAM and
an ActiveSync connection is made, the WLAN and WWAN radios (if applicable) are disabled. This is a
Microsoft security feature to prevent connection to two networks at the same time.
Page view 192
1 2 ... 188 189 190 191 192 193 194 195 196 197 198 ... 251 252

Comments to this Manuals

No comments