Motorola APX 4000 User's Guide download pdf (Page 78)

Advanced Features

English

Re-Initiating Man Down

After exiting the Emergency Operation when the radio is still in

Man Down condition (tilted achieving threshold angle or

motionless), user must first exit Man Down condition to then re-

initiate the Man Down feature.

Procedure:

Return the radio to the vertical position

Shake the radio (when motion sensitivity is enabled).

Testing the Man Down Feature

Note: Enable the Emergency feature with Silent Alarm

disabled, but not in Surveillance Mode before running

this test on the radio.

Procedure:

When Man Down is enabled on the radio:

1 Turn the radio on and place in the vertical position, for at

least 5 seconds.

2 Lay the radio down in the horizontal position.

3 Wait for alert tone.

4 The radio alerts with audible tone and displays Man-Down.

If no tone is heard, make sure that the Man Down feature is

enabled on your radio. If Man Down feature was not

enabled, please enable it and go through steps 1,2 and 3

again.

If the Man Down feature is enabled and no tone is heard,

send the radio to a qualified technician.

Handling Man Down Functional Error Messages

Procedure:

1 If your radio display shows one of the following error

messages: Hardware board absent, Man-Down Hw

error or Hw Board Mismatch. Send the radio to the

qualified technician to fix this error.



1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 143 144

No comments

Motorola APX 4000 User's Guide Page 78