Motorola MTM5400 User's Guide Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 176
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
9
Powering On (Emergency Button)
Press and hold the Emergency button to power On.
The MTM5400 will power On in Emergency Operation or in
standard mode (as programmed).
Powering On with Transmit Inhibit (TXI) Active
Transmit Inhibit is a feature allowing you to switch off
transmission before entering a Radio-Frequency (RF)
sensitive area.
To activate this feature, press Menu and select More...
>Networks >TXI Mode >Activate.
The TXI Mode remains active at power On. You will be asked
whether to leave the TXI Mode On or not.
Press the Yes key to deactivate the TXI Mode. If the
MTM5400 was previously used in Trunked Mode, it will
register to the network. If the MTM5400 was previously used
in Direct Mode, it will remain in Direct Mode.
Press No in Trunked Mode and the MTM5400 powers down;
press No in DMO and you remain in DMO with TXI selected.
Pressing the Emergency button, even if
Transmit Inhibit is activated, causes the
MTM5400 to transmit immediately. The
MTM5400 must NOT be within the RF
sensitive area when entering Emergency
Operation.
Ensure you have left the RF sensitive area
before deactivating Transmit Inhibit.
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 175 176

Comments to this Manuals

No comments