104
Time & Date Display Settings
From the main menu, select Setup > Time & Date
>Display.
The display shows the current setting:
1. Time & Date
– The MTM5400 displays time and date.
2. Time only
– The MTM5400 displays time only. Format
Date sub-menu is disabled.
3. Date Only
– The MTM5400 displays date only. Format
Time sub-menu is disabled.
4. Off
– The MTM5400 does not display time nor date. Format
menu is disabled.
Scroll to the desired setting and press Select
. Press Back to
exit.
Setting Time Format
To change displayed time format between 24-hour scale and
12-hour scale:
1. From the main menu, select Setup > Time & Date
> Format > Format Time.
2. Scroll through the settings.
3. Choose required setting, and press Select. Press Back to
exit.
Setting Date Format
To change displayed date format between DD/MM/YY, MM/
DD/YY, DD-MON-YY and YY/MM/DD:
1. From the main menu, select Setup > Time & Date
> Format > Format Date.
2. Scroll through the settings.
3. Choose required setting, and press Select. Press Back to
exit.
Time and date are synchronized by the infrastructure. When not
within the infrastructure signal range you can set the values
manually.
Comments to this Manuals