Motorola XPR 4580 User Manual download pdf (Page 42)

Advanced Features

English

Scan

When you start a scan, your radio cycles through the

programmed scan list for the current channel looking for voice

activity.

The yellow LED blinks and you see the scan icon on the display.

During a dual mode scan, if you are on a digital channel, and

your radio locks onto an analog channel, it automatically

switches from digital mode to analog mode for the duration of

the call. This is also true for the reverse.

There are two ways of initiating scan:

• Main Channel Scan (Manual): Your radio scans all the

channels/groups in your scan list. On entering scan, your

radio may – depending on the settings – automatically start

on the last scanned “active” channel/group or on the channel

where scan was initiated.

• Auto Scan (Automatic): Your radio automatically starts

scanning when you select a channel/group that has Auto

Scan enabled.

NOTE: This feature is not applicable in Capacity Plus.

Starting and Stopping Scan

Procedure:

Press the programmed Scan button to start or stop Scan. OR

Follow the procedure below.

1 Use the Channel Rocker to select a channel programmed

with a scan list.

2 S to access the menu.

3 Por Q to Scan and press N to select.

4 The display shows Turn On if scan is disabled.

The display shows Turn Off if scan is enabled.

5 Press N to select.

6 The yellow LED blinks and the scan icon is displayed when

Scan is enabled.

The LED turns off and the scan icon is not displayed when

Scan is disabled.

While scanning, the radio will only accept data (e.g. text

message, location, telemetry, or PC data) if received on its

Selected Channel.



1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 120 121

No comments

Motorola XPR 4580 User Manual Page 42