Motorola CM300TM User Manual download pdf (Page 37)

35

English

PHONE

5 Your dealer/programmer can preprogram your

radio in one of three ways to enter your

access code to the repeater.

Immediate Auto – automatically sends the

access code.

Delayed Auto – your radio will transmit the

access code upon a PTT button press.

Manual - Enter your access code using the

DTMF microphone keypad and press the PTT

button.

6 When you hear a dial tone:

Enter the phone num-

ber using the DTMF

microphone keypad.

The number will scroll

to the left,

– or –

G or H to select a

number from the

phone list.

Note: Only the first 8 digits are displayed.

– or –

XXXXXXX

XXXXXXXX

a. Press and release the preprogrammed

Speed Dial button.

b. Press the key (0 to 9) corresponding to

the number you want to call.

Note: To redial the last number dialed (if

not using Speed Dial), press and

release the PTT button immediately

after the access code is sent. The

radio sends the last number dialed.

– or –

If you entered your access code

using the DTMF keypad, press

G

once to access the last number

dialed; then press and release the

PTT button.

7 Press and release the PTT button, if required

for your radio.

8 Hold the radio in a vertical position with the

microphone 1 to 2 inches (2.5 to 5 cm) away

from your mouth. Press and hold the PTT but-

ton to talk. Release the PTT button when the

other party wants to talk, both parties will

need to speak in turn.

05_Phone.fm Page 35 Friday, July 11, 2003 11:32 AM

1 ... 36 37 38 ... 68

Comments to this Manuals

No comments