Motorola V3229 - 14.4 Kbps Modem Specifications download pdf (Page 143)

V.3229 / V.3229L <C#>-7

Status Registers

To disable the escape command, set S2 to any value

greater than 127.

End-of-Line

Character

S3=0-127

The standard end of line character is the carriage

return (ASCII value of 13). This character ends each

command as it is sent to the modem. It is also sent

by the modem after each status message or number

code.

To change the character, set S3 to the desired ASCII

value (0-127).

Line Feed

Character

S4=0-127

The standard character is the line feed (ASCII value

of 10). This character is sent by the modem after each

status message. To change it, set S4 as desired (0-

127).

Backspace

Character

S5=0-127

The standard character is the backspace (ASCII value

of 8). To change it, set S5 to the desired value (0-

127).

Pause Before

Dialing

S6=0-255

When dial tone detection is disabled (command X,

X1, or X3 in effect), the modem waits the number of

seconds (0-255) stored in this register before dialing.

1 ... 142 143 144 ... 273

No comments

Motorola V3229 - 14.4 Kbps Modem Specifications Page 143