<C#>-58 V.3229 / V.3229L
5
synchronous Operating Commands
reliable modes allow protocol fallback. Refer to
Chapter 8 for descriptions.
*default
Auto-Reliable
Fallback Character
%An
Selects the ASCII character to be recognized as the
auto-reliable fallback character by the answering
modem. During negotiation of protocol in auto-
reliable mode, the answering modem switches from
reliable to normal mode when receiving the auto-
reliable fallback character from the calling modem
and passes the character to the serial port.
Enter AT%An to set the auto-reliable fallback char-
acter (n=1 - 127 decimal representing an ASCII
character).
Table 50:
Command Operation
\N Normal mode - no error control; data
buffered
\N1 Direct mode - no error control; data not
buffered
\N2 MNP only - try MNP; disconnect if not
successful
\N3 MNP or normal - try MNP; fallback to
normal async
\N4 LAPM only - try LAPM; disconnect if
not successful
\N5 LAPM or normal - try LAPM; fallback
to normal
\N6 LAPM or MNP - try both protocols;
disconnects if not successful
\N7 LAPM, MNP, or normal - try both
protocols; fallback to normal if not suc-
cessful*
Comments to this Manuals