Motorola RFS6000 - Wireless RF Switch User Manual Page 365
- Page / 948
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Global Configuration Commands
5-109
• max-age <6-40> – Max-age is the maximum time in
seconds for which (if a bridge is the root bridge) a
message is considered valid. This prevents the frames
from looping indefinitely. The value of max-age must be
greater than twice the value of hello time plus one, but
less than twice the value of forward delay minus one.
The permissible range for max-age is 6-40 seconds.
Configure this value sufficiently high, so a frame
generated by root can be propagated to the leaf nodes
without exceeding the max-age. Use this command to set
the max-age for a bridge. This value is used by all
instances.The default value of bridge max-age is 20
seconds.
• max-hops <7-127> – Specifies the maximum allowed
hops for a BPDU in an MST region. This parameter is used
by all MST instances. To restore the default value, use the
no parameter with this command. The default maxhops in
a MST region is 20.
- Motorola RFS Series Wireless 1
- LAN Switches 1
- About This Guide 3
- Annotated Symbols 7
- Motorola Service Information 11
- General Information 12
- Motorola, Inc 13
- End-User License Agreement 13
- Contents 19
- Chapter 3. User Exec Commands 21
- Contents 23
- Chapter 22. ESPI Instance 33
- Chapter 23. RFID Instance 33
- Chapter 24. SOLE Instance 34
- Chapter 25. Smart RF Instance 34
- 1.1 CLI Overview 38
- Introduction 39
- Command Description 41
- 1.3.1 Basic Conventions 43
- 1.4.3 Deleting Entries 47
- Keystrokes Purpose 48
- 2.1.1 clrscr 50
- 2.1.2 exit 51
- 2.1.3 help 52
- 2.1.4 no 53
- – high temperature limit 58
- – low temperature limit 58
- – URL to which to copy 58
- Parameters (GLOBAL Config) 80
- 2.2 show 85
- Display 86
- 2.2.1 autoinstall 90
- 2.2.2 banner 91
- 2.2.4 crypto 93
- 2.2.6 history 97
- 2.2.7 interfaces 98
- 2.2.8 ip 100
- Common Commands 101
- Parameters 101
- 2.2.9 ldap 107
- 2.2.10 licenses 109
- 2.2.11 logging 110
- 2.2.12 mac 111
- 2.2.13 mac-address-table 112
- 2.2.14 management 113
- 2.2.15 mobility 114
- 2.2.16 ntp 117
- 2.2.17 port-channel 119
- 2.2.18 power 120
- 2.2.19 privilege 121
- 2.2.20 radius 122
- • RFS7000 123
- • RFS6000 123
- 2.2.22 redundancy -group 124
- 2.2.23 redundancy-history 127
- 2.2.24 redundancy -members 128
- 2.2.25 rtls 129
- 2.2.26 smtp-notification 132
- 2.2.27 snmp 134
- 2.2.28 snmp-server 135
- 2.2.30 static-channel-group 140
- 2.2.31 terminal 141
- 2.2.32 timezone 142
- 2.2.33 traffic-shape 143
- 2.2.34 users 144
- 2.2.35 version 145
- 2.2.36 wireless 146
- 2.2.37 wlan-acl 160
- 2.2.38 access-list 161
- 2.2.39 aclstats 162
- 2.2.40 alarm-log 163
- 2.2.41 boot 164
- 2.2.42 clock 165
- 2.2.43 debugging 166
- 2.2.44 dhcp 167
- 2.2.45 file 168
- 2.2.46 ftp 169
- 2.2.47 password-encryption 170
- 2.2.48 running-config 171
- 2.2.49 securitymgr 175
- 2.2.50 sessions 176
- 2.2.51 startup-config 177
- 2.2.52 upgrade-status 179
- 2.2.53 mac-name 180
- 2.2.54 access-list 181
- 2.2.55 aclstats 182
- 2.2.56 alarm-log 183
- RFSwitch#show alarm-log 1 184
- RFSwitch# 184
- 2.2.57 firewall 185
- 2.2.58 role 186
- User Exec Commands 187
- Command Description Ref 188
- 3.1.1 clear 189
- RFSwitch> 190
- 3.1.2 cluster-cli 191
- 3.1.3 debug 192
- Examples 193
- 3.1.5 enable 195
- 3.1.6 logout 196
- 3.1.7 page 197
- 3.1.8 ping 198
- 3.1.9 quit 199
- 3.1.10 telnet 200
- 3.1.11 terminal 201
- 3.1.12 traceroute 202
- Privileged Exec Commands 203
- 4.1.1 acknowledge 206
- 4.1.2 archive 207
- If Untar fails..? 208
- 4.1.3 cd 209
- 4.1.4 change-passwd 210
- 4.1.5 clear 211
- 4.1.6 clock 215
- 4.1.7 cluster-cli 216
- 4.1.8 configure 217
- 4.1.9 copy 218
- 4.1.10 debug 219
- – Debugs all default messages 220
- 4.1.11 delete 227
- 4.1.12 diff 228
- + policy vlan 44 229
- + policy wlan 10 229
- group kumar3 229
- 4.1.14 disable 231
- 4.1.15 edit 232
- 4.1.16 enable 233
- 4.1.17 erase 234
- 4.1.18 halt 235
- 4.1.19 kill 236
- 4.1.20 logout 237
- 4.1.21 mkdir 238
- 4.1.22 more 239
- 4.1.23 page 241
- 4.1.24 ping 242
- 4.1.25 pwd 243
- 4.1.26 quit 244
- 4.1.27 reload 245
- 4.1.28 rename 246
- 4.1.29 rmdir 247
- 4.1.30 telnet 248
- 4.1.31 terminal 249
- 4.1.33 upgrade 251
- 4.1.34 upgrade - abort 253
- 4.1.35 write 254
- Global Configuration Commands 257
- 5.1.1 aaa 261
- Usage Guidelines 262
- 5.1.3 autoinstall 270
- RFSwitch(config)# 271
- 5.1.4 banner 272
- 5.1.5 boot 273
- 5.1.6 bridge 274
- 1 vlan 2 276
- 5.1.7 country-code 277
- 5.1.8 crypto 278
- command is issued 287
- 5.1.9 do 295
- 5.1.10 end 296
- 5.1.11 errdisable 297
- 5.1.12 ftp 298
- 5.1.13 hostname 299
- 5.1.14 interface 300
- RFSwitch(config-if)# 301
- 5.1.15 ip 302
- 5.1.17 line 315
- 5.1.18 local 316
- 5.1.19 logging 317
- 5.1.20 mac 320
- 5.1.21 mac-address-table 321
- 5.1.22 mac-name 322
- 5.1.23 management 323
- 5.1.24 ntp 324
- 5.1.25 prompt 329
- 5.1.26 radius-server 330
- RFSwitch(config-radsrv)# 331
- 5.1.27 ratelimit 332
- 5.1.28 redundancy 333
- 5.1.29 role 336
- 5.1.31 service 339
- RFSwitch(config)#service dhcp 341
- 5.1.32 smtp-notification 342
- 5.1.33 snmp-server 350
- 5.1.34 spanning-tree 363
- (config-mst) instance 364
- RFSwitch(config-mst)# 366
- 5.1.35 timezone 367
- 5.1.36 traffic-shape 368
- 5.1.37 username 371
- 5.1.39 wireless 375
- 5.1.40 wlan-acl 376
- 5.1.41 network-element-id 379
- 5.1.42 firewall 380
- Crypto-isakmp Instance 383
- 6.1.1 authentication 385
- 6.1.2 clrscr 386
- 6.1.3 encryption 387
- 6.1.4 end 388
- 6.1.5 exit 389
- 6.1.7 hash 391
- 6.1.8 help 392
- 6.1.9 lifetime 393
- 6.1.10 no 394
- 6.1.11 service 395
- 6.1.12 show 397
- Crypto-group Instance 401
- 7.1.1 clrscr 403
- 7.1.2 dns 404
- 7.1.3 end 405
- 7.1.4 exit 406
- 7.1.5 help 407
- 7.1.6 service 408
- 7.1.7 show 409
- Crypto-peer Instance 413
- 8.1.1 clrscr 415
- 8.1.2 end 416
- 8.1.3 exit 417
- 8.1.4 help 418
- 8.1.5 no 419
- 8.1.6 service 420
- 8.1.7 set 421
- 8.1.8 show 422
- Crypto-ipsec Instance 425
- 9.1.1 end 427
- 9.1.2 exit 428
- 9.1.3 help 429
- 9.1.4 mode 430
- 9.1.5 no 431
- 9.1.6 show 432
- Crypto-map Instance 435
- 10.1.1 clrscr 437
- 10.1.2 end 438
- 10.1.3 exit 439
- 10.1.4 help 440
- 10.1.5 match 441
- 10.1.7 service 444
- [ipaddress 447
- <host name>] 447
- Crypto-trustpoint Instance 453
- 11.1.1 clrscr 455
- 11.1.2 company-name 456
- 11.1.3 email 457
- 11.1.4 end 458
- 11.1.5 exit 459
- 11.1.6 fqdn 460
- 11.1.7 help 461
- 11.1.8 ip-address 462
- 11.1.9 no 463
- 11.1.10 password 464
- 11.1.11 rsakeypair 465
- 11.1.12 service 466
- 11.1.13 show 467
- 11.1.14 subject-name 469
- Interface Instance 471
- 12.1.1 clrscr 473
- 12.1.2 crypto 474
- 12.1.3 description 475
- 12.1.4 duplex 476
- 12.1.5 end 477
- 12.1.6 exit 478
- 12.1.7 help 479
- 12.1.8 ip 480
- {secondary} 481
- <1-1000000> 481
- 12.1.9 mac 483
- 12.1.10 management 484
- 12.1.11 no 485
- 12.1.12 port-channel 486
- How src-dst-mac mode works 488
- How src-dst-ip mode works 488
- 12.1.13 power 489
- 12.1.14 service 491
- 12.1.15 show 492
- 12.1.17 spanning-tree 495
- 12.1.19 static-channel-group 499
- 12.1.20 switchport 500
- 12.1.21 storm-control 502
- Spanning tree-mst Instance 503
- instance configurations 504
- 13.1.1 clrscr 505
- 13.1.2 end 506
- 13.1.3 exit 507
- 13.1.4 help 508
- 13.1.5 instance 509
- 13.1.6 name 510
- 13.1.7 no 511
- 13.1.8 revision 512
- 13.1.9 service 513
- 13.1.10 show 515
- Extended ACL Instance 517
- 14.1.1 clrscr 519
- 14.1.2 deny 520
- 14.1.4 exit 527
- 14.1.5 help 528
- 14.1.6 mark 529
- RFSwitch(config-ext-nacl)# 533
- 14.1.7 no 535
- 14.1.8 permit 536
- 14.1.9 service 541
- 14.1.10 show 542
- Standard ACL Instance 545
- 15.1.1 clrscr 547
- 15.1.2 deny 548
- 15.1.3 end 550
- 15.1.4 exit 551
- 15.1.5 help 552
- 15.1.6 mark 553
- 15.1.8 permit 556
- 15.1.10 show 560
- Extended MAC ACL Instance 563
- 16.1.1 clrscr 565
- 16.1.2 deny 566
- 01:02:89:78:78:45 569
- 16.1.4 exit 571
- 16.1.5 help 572
- 16.1.6 mark 573
- 16.1.7 no 576
- 16.1.8 permit 577
- MAC address: 580
- 16.1.9 service 581
- 16.1.10 show 583
- DHCP Server Instance 587
- 17.1.1 address 590
- 17.1.2 bootfile 591
- 17.1.3 class 592
- 17.1.3.2 config-dhcp-class 593
- 11.22.33.56 594
- RFSwitch(config-dhcp-class)# 594
- 17.1.4 client-identifier 595
- 17.1.5 client-name 596
- 17.1.6 clrscr 597
- 17.1.7 ddns 598
- 17.1.8 default-router 600
- 17.1.9 dns-server 601
- 17.1.10 domain-name 602
- 17.1.11 end 603
- 17.1.12 exit 604
- 17.1.13 hardware-address 605
- 17.1.14 help 606
- 17.1.15 host 607
- 17.1.16 lease 608
- 17.1.17 netbios-name-server 610
- 17.1.18 netbios-node-type 611
- 17.1.19 network 612
- 17.1.20 next-server 613
- 17.1.21 no 614
- 17.1.22 option 615
- 17.1.23 service 616
- 17.1.24 show 617
- 17.1.25 update 619
- 17.1.26 unitcast-enable 620
- 17.2.2 Creating a Host Pool 623
- 17.2.4 Creating a DHCP Option 626
- DHCP Class Instance 627
- 18.1.1 clrscr 629
- 18.1.3 exit 631
- 18.1.4 help 632
- 18.1.5 multiple-user-class 633
- 18.1.6 no 634
- 18.1.7 option 635
- 18.1.9 show 638
- Radius Server Instance 641
- 19.1.1 authentication 643
- 19.1.2 ca 645
- 19.1.3 clrscr 646
- 19.1.4 crl-check 647
- 19.1.5 end 648
- 19.1.6 exit 649
- 19.1.7.1 clrscr 651
- 19.1.7.2 end 651
- 19.1.7.3 exit 651
- 19.1.7.4 group 652
- 19.1.7.5 guest-group 652
- 19.1.7.6 help 653
- 19.1.7.7 no 654
- 19.1.7.8 policy 655
- 19.1.7.11 service 658
- 19.1.7.12 show 659
- 19.1.8 help 663
- 19.1.9 ldap-server 664
- Name:-%{User-Name}}) 665
- 19.1.10 nas 667
- 19.1.11 no 668
- 19.1.12 proxy 669
- 19.1.13 rad-user 671
- 19.1.15 service 675
- 19.1.16 show 676
- Wireless Instance 679
- 20.1.1 aap 683
- RFSwitch(config-wireless)# 684
- 20.1.2 admission-control 685
- 20.1.3 adopt-unconf-radio 686
- 20.1.4 adoption-pref-id 687
- 20.1.5 ap 688
- Floor SalesUnit 690
- 20.1.6 ap-containment 691
- 20.1.7 ap-detection 692
- 20.1.9 ap-ip 695
- 20.1.11 ap-timeout 698
- 20.1.12 ap-udp-port 699
- 20.1.13 auto-select-channels 700
- 20.1.14 broadcast-tx-speed 701
- 20.1.15 client 702
- <MAC/Mask>] 704
- 20.1.16 clrscr 706
- 20.1.18 convert-ap 708
- 20.1.19 country-code 711
- 20.1.20 debug 712
- 20.1.22 dhcp-sniff-state 716
- 20.1.23 dot11-shared-key-auth 717
- 20.1.24 end 718
- 20.1.25 exit 719
- 20.1.27 help 721
- 20.1.28 hotspot 722
- 20.1.29 ids 723
- 20.1.31 mac-auth-local 729
- 20.1.32 manual-wlan-mapping 731
- 20.1.33 mobile-unit 732
- 20.1.34 mobility 733
- 10 high 20 735
- 20.1.37 nas-id 736
- 20.1.38 nas-port-id 737
- 20.1.39 no 738
- 20.1.40 proxy-arp 739
- 20.1.41 qos-mapping 740
- 20.1.42 radio 742
- 20.1.43 rate-limit 756
- 20.1.46 sensor 760
- 20.1.47 service 762
- 20.1.48 show 775
- 20.1.49 smart-rf 778
- 20.1.50 smart-scan-channels 779
- 20.1.51 wlan 780
- should be less than what is 795
- 20.1.52 wlan-bw-allocation 807
- RTLS Instance 809
- 21.1.1 aeroscout 811
- 21.1.2 clear 812
- 21.1.3 clrscr 813
- 21.1.4 end 814
- 21.1.5 espi 815
- 21.1.6 exit 816
- 21.1.7 help 817
- 21.1.8 ekahau 818
- 21.1.9 no 819
- RFSwitch 820
- RFSwitch(config-rtls)# 823
- 21.1.11 rfid 824
- 21.1.12 service 825
- 21.1.13 show 828
- 21.1.14 site 831
- command 832
- 21.1.15 sole 833
- 21.1.16 switch 834
- 21.1.17 zone 835
- 21.1.18 ap 836
- ESPI Instance 837
- 22.1.1 adapter 839
- 22.1.2 clrscr 840
- 22.1.3 end 841
- 22.1.4 exit 842
- 22.1.5 help 843
- 22.1.6 no 844
- 22.1.7 service 845
- 22.1.8 show 846
- RFID Instance 849
- 23.1.1 activate 851
- 23.1.2 clrscr 852
- 23.1.3 end 853
- 23.1.4 exit 854
- 23.1.5 help 855
- 23.1.6 no 856
- 23.1.7 reader 857
- 400 y 400 z 500 859
- RFSwitch(config-rtls-rfid)# 859
- 23.1.8 service 860
- 23.1.9 show 863
- SOLE Instance 867
- 24.1.1 clrscr 869
- 24.1.2 end 870
- 24.1.3 exit 871
- 24.1.4 help 872
- 24.1.5 locate 873
- RFSwitch(config-rtls-sole)# 874
- 24.1.6 no 875
- 24.1.7 redundancy 876
- 24.1.8 service 877
- 24.1.9 show 878
- 24.1.10 rssi-filter 881
- <5-3600> 882
- 24.1.12 mobile-unit 883
- Smart RF Instance 885
- 25.1.1 assignable-power-range 887
- 25.1.2 auto-assign 888
- 25.1.3 clrscr 889
- 25.1.4 end 890
- 25.1.5 exit 891
- 25.1.6 extensive-scan 892
- 25.1.7 help 893
- 25.1.8 hold-time 894
- 25.1.9 no 895
- 25.1.11 radio 903
- 25.1.13 retry-threshold 909
- 25.1.14 run-calibrate 910
- 25.1.15 scan-dwell-time 911
- 25.1.16 schedule-calibrate 912
- 25.1.17 select-channels 913
- 25.1.18 service 914
- 25.1.21 verbose 925
- Role Instance 927
- Command Description mRef 928
- 26.1.1 ap-location 929
- RFSwitch(config-role)# 930
- 26.1.2 authentication-type 931
- 26.1.3 encryption-type 932
- 26.1.4 essid 934
- 26.1.5 group 935
- 26.1.6 ip 936
- 26.1.7 mac 937
- 26.1.8 mu-mac 938
- 26.1.9 clrscr 939
- 26.1.11 end 941
- 26.1.12 exit 942
- 26.1.13 help 943
- 26.1.14 service 944
- 26.1.15 show 945
Related products and manuals for Network switches Motorola RFS6000 - Wireless RF Switch
Network switches Motorola T1/E1 User Manual
(25 pages)
(25 pages)
Network switches Motorola T1/E1 Specifications
(122 pages)
(122 pages)
(31 pages)© 2020, manymanuals.com. All rights reserved. | 0.081 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals