Motorola SM56 User Manual download pdf (Page 31)

S10=n Disconnect after n seconds; n=0 to 255 in 0.1 second

increments; after DCD signal is de-asserted. Default

= 14

S11 Tone Length

S11=n Specifies duration, in 0.001 second increments, of

DTMF tone when it is generated; n=60 to 255.

Default =80

S12 Escape Code Guard Time

S12=n Specifies the interval, in 0.02-second increments,

that must be present on either side of the escape code

(+++) for the modem to recognize the escape com-

mand and enter command mode. If S12=0, the speed

at which you enter the escape sequence is not a fac-

tor. Default = 50

S18 Te st Timer

S18=n Specifies test execution duration; n=0 to 255.

Default = 0

S92 Modem-on-Hold Messaging Monitoring

S92=n Specifies the enable(n=1) or disable(n=0) of the

Modem-on-Hold UbiSurf SM56 tray applet helper

messaging. Default = 1

Table 5: ATS (S-Register) Commands

S-Register Option

Description

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 41 42

No comments

Motorola SM56 User Manual Page 31