Motorola SM56 User Manual download pdf (Page 30)

ATS (S-Register)

Commands

The modem responds to the following ATS command options.

The letters AT (or at) must precede all commands except A/ and +++.

Factory-default options are underlined.

Table 5: ATS (S-Register) Commands

S-Register Option

Description

S0 Auto-Answer on Ring Number

S0=0

Disable

S0=n Answer on Ring n; n=0 to 255

S1 Ring Count

S1=n Counts the number of rings in an incoming call. If

the modem is configured to auto-answer (S0 set to a

non-zero option), when S1=S0, the modem answers

the call.

S2 Select Escape Character

S2=n Specifies ASCII character for Escape; n=0 to 255.

Default = 43 (+)

S3 Select Carriage-Return Character

S3=n Specifies ASCII character for Carriage-Return; n=0

to 127. Default = 13 (CR)

S4 Select Line-Feed Character

S4=n Specifies ASCII character for Line-Feed; n=0 to

127. Default = 10 (LF)

S5 Select Backspace Character

S5=n Specifies ASCII Character for Backspace; n=0 to

127. Default = 8 (BS)

S6 Blind Dial

S6=n Before dialing, the modem goes off-hook and waits

n seconds; n=0 to 255. Note: When the ATX2 or

ATX4 option is in effect, the S6 value is disregarded.

Default = 2

S7 Call Time-out

S7=n Number of seconds in which connection must be

established or call will be disconnected; n=1 to 255.

Default = 60

S8 Pause Delay

S8=n Pause for n seconds; n=0 to 255; for dial modifier in

a dial string. Default = 2

S10 DCD Loss Disconnect

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 41 42

No comments

Motorola SM56 User Manual Page 30