Motorola LS6000B-U Specifications Page 136
- Page / 175
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Programming the LS 6000
5-103
Hardware Handshaking
The data interface consists of an RS-232C port. The port has
been designed to operate either with or without the hardware
handshaking lines, Request to Send (RTS), and Clear to Send
(CTS).
If Standard RTS/CTS handshaking is selected, scan data is
transmitted according to the following sequence:
!
The controller reads the CTS line for activity. If CTS is
asserted, the controller waits up to 2 seconds for the host
to negate the CTS line. If, after 2 seconds (default), the
CTS line is still asserted, the scanner sounds a transmit
error and any scanned data is lost.
!
When the CTS line is negated, the controller asserts the
RTS line and waits up to 2 seconds for the host to assert
CTS. When the host asserts CTS, data is transmitted. If,
after 2 seconds (default), the CTS line is not asserted, the
scanner sounds a transmit error and discards the data.
!
When data transmission is complete, the controller
negates RTS 10 msec after sending the last character.
!
The host should respond by negating CTS. The
controller checks for a negated CTS upon the next
transmission of data.
During the transmission of data, the CTS line should be
asserted. If CTS is deasserted for more than 50 ms between
characters, the transmission is aborted, the scanner sounds a
transmission error, and the data is discarded.
If the above communications sequence fails, the scanner issues
an error indication. In this case, the data is lost and must be
rescanned.
- Product Reference Guide 1
- LS 6000 Series 1
- Product Reference Guide 2
- Contents 4
- About This Guide 10
- Notational Conventions 11
- Related Publications 11
- Service Information 12
- Warranty 13
- Chapter 1 16
- Introduction 16
- Using Your Scanner 17
- Chapter 2 18
- Switching Cables 19
- (Optional) 20
- Connecting to a Host 20
- Chapter 3 22
- Scanning With the LS 6000 22
- Scanning in Hands-Free 24
- (Presentation) Mode 24
- Selecting Beeper Volume 25
- Beeper Indications 26
- LED Indications 27
- Chapter 4 28
- Scan Zone 29
- Technical Specifications 30
- Height 7.64 in. (194 mm) 31
- Width 2.72 in. (69 mm) 31
- Depth 3.19 in. (81 mm) 31
- ITEM DESCRIPTION 31
- What If 32
- Chapter 5 34
- Programming the LS 6000 34
- Defaults 35
- Set Default Parameter 40
- Host Type 41
- Host Type (Cont’d) 42
- RS-232C Host Types (Cont’d) 45
- Tr i g g e r M o d e 49
- Trigger Mode (Cont’d) 50
- Time to Return to Continuous 51
- Omnidirectional 51
- Beeper Volume 52
- Beeper Volume (Cont’d) 53
- Beeper Frequency 54
- Beeper Frequency (Cont’d) 55
- Time-out Between Decodes 57
- Different Symbols 57
- Laser On Time 58
- Rest Mode Time-out 59
- Rest Mode Timeout (Cont’d) 60
- Beep After Good Decode 61
- Linear Security Level 1 62
- Linear Security Level 2 63
- Linear Security Level 3 63
- Linear Security Level 4 64
- UPC/EAN Options 65
- Enable/Disable UPC-A 66
- Enable/Disable EAN-8 67
- Enable/Disable EAN-13 68
- Enable/Disable Bookland EAN 69
- Decode UPC/EAN Supplementals 70
- Transmit UPC-A Check Digit 73
- Transmit UPC-E Check Digit 74
- Random Weight Check Digit 75
- UPC-A Preamble 76
- UPC-A Preamble (Cont’d) 77
- UPC-E Preamble 78
- UPC-E Preamble (Cont’d) 79
- Convert UPC-E to UPC-A 80
- EAN Zero Extend 81
- UPC/EAN Predecode Block 82
- Accept Predecode Block 83
- UPC/EAN Security Level 84
- UPC/EAN Security Level 1 85
- UPC/EAN Security Level 2 85
- UPC/EAN Security Level 3 86
- Linear UPC/EAN Decode 87
- Linear Supplemental Decode 88
- UPC/EAN Decode Performance 89
- UPC/EAN Coupon Code 91
- Code 128 Options 92
- Code 128 Decode Performance 93
- Enable/Disable UCC/EAN-128 95
- Code 39 Options 96
- Set Lengths for Code 39 97
- Transmit Code 39 Check Digit 101
- Code 39 Decode Performance 102
- ENABLE CODE 39 FULL ASCII 105
- DISABLE CODE 39 FULL ASCII 105
- Interleaved 2 of 5 Options 106
- One Discrete Length 107
- Two Discrete Lengths 108
- Length Within Range 108
- Any Length 109
- USS CHECK DIGIT 111
- OPCC CHECK DIGIT 111
- Transmit I 2 of 5 Check Digit 112
- Convert I 2 of 5 to EAN-13 113
- Codabar Options 114
- Set Lengths for Codabar 115
- CLSI Editing 118
- NOTIS Editing 119
- Transmit Code ID Character 120
- AIM CODE ID CHARACTER 121
- Pause Duration 122
- Prefix/Suffix Values 123
- (Cont’d) 125
- RS-232C Parameters 128
- Baud Rate (Cont’d) 129
- Parity (Cont’d) 133
- Check Receive Errors 135
- Hardware Handshaking 136
- Hardware Handshaking (Cont’d) 137
- Software Handshaking 140
- Software Handshaking (Cont’d) 141
- Host Serial Response Timeout 144
- RTS Line State 145
- Stop Bit Select 146
- ASCII Format 147
- Beep on <BEL> 148
- Intercharacter Delay 149
- Numeric Bar Codes 150
- Numeric Bar Codes (Cont’d) 151
- Appendix A 156
- Programming Reference 156
- AIM Code Identifiers 159
- Modifier Characters 160
- ASCII Character Set 163
- Index-ii 171
- Index-iii 172
- Index-iv 173
- Tell Us What You Think 174
- 70-33186-01 175
- Revision B — January 1999 175
Related products and manuals for Bar code readers Motorola LS6000B-U
Bar code readers Motorola RS409 User Manual
(16 pages)
(16 pages)
(2 pages)
Bar code readers Motorola MC17T User Manual
(24 pages)
(24 pages)
Bar code readers Motorola LS6000B-U User's Guide
(180 pages)
(180 pages)
© 2020, manymanuals.com. All rights reserved. | 0.050 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals