Motorola MOTOTRBO SYSTEM PLANNER Specifications Page 89

  • Download
  • Add to my manuals
  • Print
  • Page
    / 107
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 88
STATION MAINTENANCE & ALIGNMENT
Routine Maintenance
The station has been designed with state-of-the-art technology and operates under software
control, thus requiring minimal routine maintenance. Virtually all station operating parameters
are monitored and self-corrected by the Station Control Module (SCM), making adjustments
and tuning virtually unnecessary. Provided that the equipment is installed in an area which
meets the specified environmental requirements, the only routine maintenance task required is
the yearly calibration of the station reference oscillator circuit.
Annual cleaning is recommended for dirty sites.
Alignment
The MTR3000 requires the alignment of up to three parameters. They are as follows:
Modulation Limit: The alignment is only needed in cases where the station is
interfaced to a 3
rd
party controller that requires the use of the TX Data port on the J7
backplane connection.
Power Output Calibration (Upgraded MTR2000 Only): This alignment is to allow
entry of the PA “sticker code calibration coefficients” into the stations codeplug.
Speaker Volume: This alignment is for the adjustment of the speaker port audio
output level. (analog mode only)
Station Frequency Reference: Recommend to be verified / aligned once per year to
maintain regulatory compliance.
Customer Programming Software
The Customer Programming Software (CPS) is the tool used to configure and service the base
station/repeater. The CPS runs on a PC laptop or desktop.. The CPS program will be able to
configure and service any device supported by the CPS. Once the configuration information has
been read from a device, the CPS will tailor its menus and service screens to fit the needs of
that device.
The CPS is designed to run the currently supported Microsoft Windows Operating Systems
such as Windows XP Home and Professional, Windows 2000 & Vista.
The PC used to run the CPS requires at least 100 MB of free space to install the CPS. CPS
software comes on a CD thus a CD drive is needed on the PC. Communication with the
MTR3000 Base Station/Repeater requires both a serial port and an Ethernet port.
88
Page view 88
1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 106 107

Comments to this Manuals

No comments