Motorola APX 4000 User's Guide download pdf (Page 24)

Preparing Your Radio for Use

English

Attaching the Antenna

With the radio turned off, set the antenna in its receptacle and

turn clockwise to attach it to the radio.

To remove the antenna, turn the antenna counterclockwise.

Make sure you turn off the radio first.

Attaching the Accessory Connector

Cover

The accessory connector is located on the antenna side of the

radio. It is used to connect accessories to the radio.

Note: To prevent damage to the connector, shield it with the

connector cover when not in use.

Insert the hooked

end of the cover

into the slot above

the connector.

Press downward on

the cover’s top to

seat it in the slot.

Once in place,

tighten by rotating

the thumbscrew

clockwise by hand.

To remove the accessory connector cover, rotate the

thumbscrew counterclockwise until it disengages from the radio.

If the thumbscrew is too tight, use an Allen wrench to loosen

it first.

Rotate and lift the connector cover to disengage it from

the radio.

Hooked End

Thumbscrew

Hex Socket

Head

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 169 170

No comments

Motorola APX 4000 User's Guide Page 24