Motorola CA10 User's Guide download pdf (Page 67)

Motorola EWB100 Usage and Deployment Guide Rev 1.7

The best option depends on the customer needs. There is sufficient flexibility to

handle many situations. Since the filename is a configuration option, the value

may be changed during the configuration process. Hence one name might be

used for initial deployment and then changed later on. Likewise each release

may specify the name of the next release.

13.4 Airbeam and User Defaults

Most of the airbeam configuration parameters have “User Default Values” since

one of the reasons for user defaults is to able to repair a broken configuration.

The user defined default commands generally follow the syntax for the

associated configuration value.

13.5 Airbeam/Device Status CLI Command Reference

13.5.1 Mode

This command enables or disables the airbeam update process. The command

is:

set airbeam mode <enable|disable>

The default is enabled. Changes take effect only after a reset.

13.5.2 User Default Mode

This command is the user defined default version of the mode comand. The

command is:

set airbeam def_mode <enable|disable>

The default is disabled.

13.5.3 Airbeam FTP Server IP address

This parameter specifies the IP address of the Airbeam server. It is used onlyi if

the Server name field is null. If the server name field is not null it will be used

together with DNS to obtain the ip address. The command is:

set airbeam ab_ip a.b.c.d

where a.b.c.d is the ip address of the airbeam server.

The default is 192.168.0.201.

13.5.4 User Default Airbeam FTP Server IP address

This command is the user defined default version of the airbeam ip address

comand. The command is:

set airbeam def_ab_ip xx

Page 67/136

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 135 136

No comments

Motorola CA10 User's Guide Page 67