Motorola EWB100 Usage and Deployment Guide Rev 1.7
17.3 Configuration Commands
17.3.1 Disable HTTP Server
If set, the device will disable CLI via the HTTP server. Other HTTP functions will
still operate. The function is controlled by the following configuration bit in the
“misc new3” command:
The bit value is 0x8000.
The server is enabled by default.
17.3.2 Port
This comment specifies the TCP port number used by the http server. The
command is:
set http port xx
where xx is the TCP port used by the http server.
The default value is 80 (decimal).
Page 85/136
Comments to this Manuals