Motorola MTP850 User's Guide download pdf (Page 24)

English

Attaching the Antenna

Insert the bottom of the antenna into the screw-in base on the top of

the MTP850. Turn clockwise until snug. Do not force.

Powering On/Off (On-Off/End/Home Key)

To power On, press and hold . Your MTP850 performs a self-

check and registration routine. After successful registration, the

MTP850 is in service.

To power Off, press and hold . You will hear a beep and the

Powering Off message is displayed.

Powering On (Emergency Button)

Press and hold the Emergency button to power On. The MTP850

will power On in Emergency Mode or in standard mode (as

programmed).

Powering On with Transmit Inhibit (TXI) Active

Transmit Inhibit is a feature allowing you to switch off transmission

before entering a Radio-Frequency (RF) sensitive area. To activate

this feature, press and select More...> Networks > TXI

Mode > Activate.

Turn the MTP850 Off before installing or removing the antenna.

Pressing the Emergency button, even if Transmit Inhibit is activated,

causes the MTP850 to transmit immediately. The MTP850 must NOT be

within the RF sensitive area when entering Emergency Mode.

W A R N I N G

6866537D79-A.book Seite 22 Mittwoch, 20. Juli 2005 10:39 10

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 41 42

No comments

Motorola MTP850 User's Guide Page 24