Motorola SG2-DRT-3X Specifications download pdf (Page 6)

6 STARLINE

SG2-DRT-3X Installation Sheet

TP XMTR A and Pad XMTR A are not used, therefore, it is not necessary to pad the

XMTR A location as no signal is present.

8 Close the housing and use a torque wrench to progressively tighten the housing bolts to a

final torque of 12 ft-lbs. in the sequence stamped on the housing lid.

Figure 6 illustrates a properly installed and cabled SG2-DRT-3X:

Figure 6

SG2-DRT-3X installed in SG2440

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

No comments

Motorola SG2-DRT-3X Specifications Page 6