Motorola F5207A, F5217A Installation Guide download pdf (Page 21)

Installation 15

MW 800 CPU Box

The MW 800 CPU box should be mounted so that the cables from the keyboard(s),

display(s), power system and peripherals can be attached. The limiting factor is the 17 feet

length of the display signal cable. When attached to the display, this cable is routed down

through the pedestal to the CPU box. Use plastic cable ties to secure the cables to the cable

tie bracket.

Radio modems can be installed inside the CPU box via the PC card slot. The antenna cable

can be routed to an external antenna through one of the two openings located on the back side

of the PC card door (see Figure 12).

Do not remove the seals from the PC card door. The seals press

against the antenna cable when the door is closed.

Cable Tie Bracket

Figure 11

CPU Box - Cable Tie Bracket (F5206 only)

Note

Figure 12

CPU Box - Antenna Cable Route of Radio Modem Installed in PC Card Slot

Radio Modem

Antenna Cable

Openings in PC Card Door

Seal

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 54 55

No comments

Motorola F5207A, F5217A Installation Guide Page 21