Motorola F5207A, F5217A Installation Guide download pdf (Page 52)

46 MW 800 Vehicle Installation Guide

Protocol iDEN (25 kHz spacing)

RF Power Output 0.6 Watts (variable in 6 steps) into 50-Ohm load

GPS F5206 - Internal Trimble™, SK II

F5207 - F5217 - Internal Trimble™, SQ

F5217 - Internal U-Blox with Dead Reckoning

WLAN F5206 - IEEE 802.11b, 11 Mbps

F5207 & F5217 - IEEE 802.11b/g, 11/54 Mbps

Bluetooth Version 1.1 compatible (in 12.1”display model) Supports

data and voice profiles

ENVIRONMENTAL

Operating

Temperature

F5206: -22 to 158°F (–30 to +70°C) for the 1.7 GHz

processor

-22 to 122°F (–30 to +50°C) for all other processors

Notes:

• Performance at extremes include start-ups (with

occasional slight delay due to hard drive heater ramp-

up time) and sustained operations of typical mobile

workstation applications.

• UL certification is available only to 131°F (55°C),

though continued operations are available above this

limit.

• When using 9 VDC battery to power the workstation,

the workstation will not power up if the temperature

range is below -22°F (-30°C)

F5207 & F5217: -22 to 158°F (-30 to +70°C)

Storage Temperature –40 to 158°F (–40 to +70°C)

Humidity 90 to 95% Relative humidity at 50°C for 8 hours

DURABILITY

Shock 20g peak 1/2 sine wave @ 11ms, 30 impacts

Vibration Per TIA/EIA 603 Paragraph 3.3.4 and MIL-STD-810F

method 514.5, Fig 514.5C-1

Drip Per MIL-STD-810F method 506.4 Procedure III

Dust Blowing Five hours in dust (140 mesh silica flour), laden

atmosphere dust agitation time is for 2 seconds every 15

minutes

Salt Fog 8 hours, 5% Sodium Chloride at 35°C, after exposure,

per MIL-STD-810F 509.4, Procedure I

1 2 ... 47 48 49 50 51 52 53 54 55

No comments

Motorola F5207A, F5217A Installation Guide Page 52