Motorola VC6000 Series Specifications Page 38

  • Download
  • Add to my manuals
  • Print
  • Page
    / 164
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 37
2 - 10 VC6000 Series Product Reference Guide
Mounting the Combination Antenna (VC6096 only)
The Combination Antenna is an optional omni-directional WWAN and WLAN antenna used with the VC6096. The
antenna mounts inside/outside the vehicle cabin or indoors/outdoors (see Figure 2-10).
Figure 2-9
Combination Antenna - Vehicle Mount
The antenna has two external RF connectors that connect to the VC6096 via two low loss RF coax cables
To install the Combination Antenna (see Figure 2-10):
1. Connect the WWAN and WLAN Cable
Connectors.
2. Place the Lower Cables Bracket under the
cables so that the two holes align with the
screw inserts on the antenna.
3. Place the Upper Cables Bracket on top of the
WWAN and WLAN Cable Connectors.
4. Align the two holes on the Upper and Lower
Cables Brackets with the screw inserts and
secure the two M4 Screws (Torque 5 in-lbs).
5. Use the three (x3) Antenna Bracket Inserts to
mount the antenna. Secure the antenna using
three M4 screws.
Figure 2-10
Combination Antenna - Installation Guidelines
CAUTION To avoid damage to the VC6096, make sure to disconnect the power cable from the VC6096 before
connecting the antenna cable. When installing the antenna cable, make sure to connect the antenna
side of the cable before connecting to the VC6096.
Vehicle Windshield
or
WWAN Cable Connector (Keep covered when not in use).
WLAN Cable Connector
(Keep covered when not in use
).
Lower Cables Bracket
Upper Cables Bracket
M4 Screws (x2)
Screw Inserts (x2)
Antenna Bracket Inserts (x3)
Page view 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 163 164

Comments to this Manuals

No comments