Motorola i560 User Manual download pdf (Page 44)

Direct Talk

Exiting Direct Talk

To set your phone to network mode when Direct

Talk is active:

1 From the Direct Talk idle screen, press m.

2 Scroll to DT Options and press O Navigation

key.

3 Select Exit DirecTalk.

Switching to Network Please Wait displays. After

a few seconds, the network idle screen appears.

Talk Range

Phones used in Direct Talk mode should be a

minimum of 6 feet apart to maximize performance

and improve transmission range.

Channels and Codes

Your phone has 10 channels and 15 codes.

Channels are divided into sets of frequencies that

allow you to make and receive Direct Talk calls.

Other parties may also be talking on the same

channel.

Codes help minimize interference from unwanted

messages and other disturbances when you are on

the same channel as others.

To have a conversation, all parties must be on the

same channel and code. For private Direct Talk

calls, the person you are calling must be in Direct

Talk and set to the same channel to which you are

set in order to receive your call.

Note: When making a code call, all parties that

are on your code and channel can hear

your conversation.

To set a channel:

1 From the Direct Talk idle screen, press A under

Edit.

2 Scroll to Channel.

3 Press A under Edit.

4 Select a channel.

5 When you are finished, press A under Back to

return to the idle screen.

To set a code:

1 From the Direct Talk idle screen, press A under

Edit.

2 Scroll to Code.

3 Press A under Edit.

4 Select a code.

5 When you are finished, press A under Back to

return to the idle screen.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 208 209

Comments to this Manuals

No comments

Motorola i560 User Manual Page 44

Comments to this Manuals

Related products and manuals for Mobile phones Motorola i560