Motorola A925 Service Manual download pdf (Page 42)

Motorola Confidential Proprietary

A920/A925Manual Test Procdures

3 - 18

Preliminary

LEDS and Keypad Backlight

Use the following procedures to verify status LED and

keypad backlight.

In order to successfully send test commands to the phone

under test, the phone doesn’t need to be in suspend

mode. Follow the listed procedure to configure the

phone to accept test commands.

Handset Test Commands

None

Radio Comm Test Commands

Click AT+MODE then SUSPEND

(Serial Only)

Click PST Initialize and click SUS-

PEND when initialization is complete

(USB Only)

Status LEDS

Handset Test Commands

62*3*3*012¹ Enable Red LED

62*4*3*012¹ Enable Green LED

RadioComm Test Commands

Select Red LED or Green LED to

enable. Deselect Red LED or

Green LED to disable.

Verification

Verify that the Red and Green status LEDS activate.

¹Leave field 3 blank and press OK

Keypad Backlight

Handset Test Commands

62*0*1¹ Enable Keypad Backlight

62*0*0¹ Disable Keypad Backlight

RadioComm Test Commands

Select Keypad to enable. Deselect

Keypad to disable.

Verification

Verify that all keypad backlight LEDs activate.

¹000 to disable

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 130 131

No comments

Motorola A925 Service Manual Page 42