Motorola A925 Service Manual download pdf (Page 16)

Motorola Confidential Proprietary

A920/A925Handset Test Commands

2 - 4

Preliminary

Command Results

Figure 12. Results Screen

They can also use the Stylus, depending on the settings

selected by the user in the control panel.

The user shall enter values in Hex or Decimal. The fol-

lowing values shall be allowed for each entry method:

• Hex: A to F and 0 to 9. (not case sensitive)

• Decimal: 0 to 9

When the user presses, "Test", the values shall be

checked whether they match the values that are allowed.

If not, they shall get an Error Message as follows:

After the user presses, "Continue", they shall be taken

back to the field where the incorrect entry method was

found.

If command processing takes more than 2 seconds a

message will display, “Running Test...”

Result Screen

The display of the output shall always be in Hexadeci-

mal Format.

Pressing the "Back" Key shall always take the user back

to the Main Entry Screen as shown in Figure 6

Figure 10. Stylus Entry

Figure 11. Invalid Entry

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 130 131

No comments

Motorola A925 Service Manual Page 16