Motorola A860 Service Manual download pdf (Page 40)

42 June 07, 2004 6809485A78-O

Disassembly A840

Removing the Display Bezel

1. Remove the battery cover, battery, antenna, keypad bezel, speaker cover,

keyboard stiffener, flip assembly, transceiver board, flip display lens, flip

assembly, flip assembly sleeve, and flip knuckle as described in the procedures.

2. Use the metal tweezers to release the five latches in the sequence shown (see

Figure 23).

3. To replace, align the connector with it’s socket on the transceiver board.

4. Gently press the flex connector into position onto the flex connector socket.

5. Lower the display bezel over the display module. Gently and firmly press the

latches into position. Ensure all the latches are engaged.

6. Replace the flip knuckle, flip assembly sleeve, flip assembly, flip display lens,

transceiver board, flip assembly, keyboard stiffener, speaker cover, keypad

bezel, antenna, battery, and battery cover as described in the procedures.

The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when

handling.

032218o

Figure 23. Removing the Display Bezel

bezel latch

display bezel

tch

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 55 56

No comments

Motorola A860 Service Manual Page 40