Motorola MC3000 User's Guide download pdf (Page 25)

Getting Started 1-7

Mobile Computer Startup

To start using the mobile computer:

• Install the main battery.

• Charge the main battery and the backup battery.

• Start the mobile computer.

Install Main Battery

If the main battery is charged, the mobile computer can be used immediately. If the main battery is not charged, see Battery Charging

on page 1-8. To remove the main battery, see Main Battery Removal on page 1-12.

To install the main battery:

1. Rotate the latches to the open position.

2. Pull on the strap to lift the Strap/Door Assembly off, bottom first.

3. Insert the battery into the slot, bottom first, and press the battery gently into the slot. The battery clip locks the battery into

place.

4. With the latches in the open position, replace the Strap/Door Assembly, top first, and press to close.

5. Rotate the latches (to the lock position) to lock the Strap/Door Assembly in place.

Figure 1-4. Main Battery Installation

Latches

Battery Clip

Strap/Door

Assembly

Battery

Battery Slot

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 113 114

No comments

Motorola MC3000 User's Guide Page 25