Motorola DSR500 User Manual download pdf (Page 11)

Notes:

Video and audio quality should be best when the DSR is connected directly to the primary

output component, such as the television or monitor (for video), and the television or home

theater A/V receiver (for audio). Use quality cables designed for these applications.

If you are using the component video outputs, you may have to toggle the HDTV mode select

button behind the flip-down door on the front panel. This toggles the HDTV output between

1080i, 480p, 480i, and native modes. Native mode (0000) is the original transmitted signal. You

should leave this on native mode unless your TV or monitor requires a specific mode such as

1080i.

If you are using the RF output tune your TV to channel 3 or 4 to match the position of the

channel 3/4 switch on the back panel of the satellite receiver.

Home theater A/V receivers can provide a method to connect multiple input sources if your

television does not have enough input connectors. Some home theater A/V receivers may also

provide very good or enhanced quality. Refer to your home theater A/V receiver instructions for

further information.

Optical

Audio

Compatible

STEREO

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

No comments

Motorola DSR500 User Manual Page 11