Motorola MT2070 Specifications Page 179

  • Download
  • Add to my manuals
  • Print
  • Page
    / 210
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 178
Maintenance and Troubleshooting 9 - 13
Cables
Table 9-8
Troubleshooting the Cables
Symptom Possible Cause Action
Device charge LED
does not light when
device is connected.
Cable is not receiving
power.
Ensure the power cable is connected securely to both the cable
and to AC power.
Cable is not seated
correctly in the device.
Remove and re-insert the cable into the device, ensuring it is
correctly seated.
Extreme battery
temperature.
Battery does not charge if battery temperature is below 32°F
(0°C) or above 104°F (40°C).
Device battery is not
charging.
Device was removed
from cable or cable was
unplugged from AC
power too soon.
Ensure cable is receiving power. Ensure device is seated
correctly. If a device battery is fully depleted, it can take up to
four hours to fully recharge the battery.
Battery is faulty. Verify that other batteries charge properly. If so, replace the
faulty battery.
Cable is not seated
correctly in the device.
Remove and re-insert the cable into the device, ensuring it is
correctly seated.
Extreme battery
temperature.
Battery will not charge if battery temperature is below 32°F
(0°C) or above 104°F (40°C).
During data
communication, no
data was transmitted,
or transmitted data
was incomplete.
Cable removed from
device during
communication.
Reattach cable to device and retransmit.
Incorrect cable
configuration.
See the system administrator.
Communication software
is not installed or
configured properly.
Perform setup as described in
Chapter 3, ActiveSync
.
Page view 178
1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 209 210

Comments to this Manuals

No comments