Motorola AP-6511 Installation Guide download pdf (Page 15)

Hardware Installation

3. Gently pull some cable out of the wall so it can be used with the AP-6511 access point.

4. Attach the metal mounting plate (shipped with the AP-6511) to an existing standard Telco

in-wall box.

The screws used to mount the bracket to the Telco Box are customer provided. You can use

the same screws that covered the existing wall plate if necessary.

Mount the bracket to the wall so the Telco Box is ready available behind the mounting plate.

5. Remove the blank plug before installing the RJ11 into the snap-in port.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 46 47

No comments

Motorola AP-6511 Installation Guide Page 15