Motorola DCH70 Installation Manual download pdf (Page 40)

4 DIAGNOSTICS

Interactive Status

This diagnostic tool gathers data about your system.

The Interactive Status fields are:

Field Description

IP The set-top IP address assigned by the NC 1500, in dotted-decimal format; for example

xxx.xxx.xxx.xxx where each xxx ranges from 000 to 255. 0.0.0.0 is displayed if the IP

address is not configured or unknown.

UPM The upstream modem address. This UPM value is the same as the terminal ID assigned by

the DAC 6000. It is a unique, system-generated, eight-digit integer between 1 and

16777215. 00000000 is displayed when the UPM is not configured or unknown.

Upstream ID The set-top transmission parameter assigned by the DAC 6000. It is a four-digit decimal

value from 0000 to 9999. 0000 is displayed if the Upstream ID is not configured or

unknown.

Downstream

The set-top transmission parameter assigned by the DAC 6000. It is a four-digit decimal

value from 0000 to 9999. 0000 is displayed if the Downstream ID is not configured or

unknown.

State The interactive status of the set-top:

OSD Description

UNCONFIG The set-top is not configured for the interactive system, and

the platform should run as pre-interactive.

MAC_CONNECT The set-top is waiting to establish a connection to the MAC

PID Stream.

INIT_WAIT_DC_OR_C The set-top is in the interactive initialization state and waiting

for the default configuration or the contention channel list

messages.

WAIT_LM_ACK The set-top is in the interactive initialization state and waiting

for Link Management Response ACK for Local Address

Message.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 51 52

No comments

Motorola DCH70 Installation Manual Page 40