Motorola APX 6000Li User's Guide download pdf (Page 22)

Preparing Your Radio for Use

English

Attaching the Accessory Connector

Cover

The accessory connector is located on the antenna side of the

radio. It is used to connect accessories to the radio.

Note: To prevent damage to the connector, shield it with the

connector cover when not in use.

Insert the hooked

end of the cover

into the slot above

the connector.

Press downward on

the cover’s top to

seat it in the slot.

Once in place,

tighten by rotating

the thumbscrew

clockwise by hand.

To remove the

accessory connector cover, rotate the thumbscrew

counterclockwise until it disengages from the radio.

If the thumbscrew is too tight, use an Allen wrench to loosen

it first.

Rotate and lift the connector cover to disengage it from

the radio.

Using the Carry Holder

Position the radio within

the carry holder with the

main speaker facing

outward. Slide the radio

down into the carry

holder until it clicks in

place.

Hooked End

Thumbscrew

Hex Socket Head

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 145 146

No comments

Motorola APX 6000Li User's Guide Page 22