Motorola V3m Service Manual download pdf (Page 38)

38 November 03, 2006 6809501A48-A

Disassembly V3m

Removing and Replacing the Display Module Assembly

1. Remove the battery cover, battery, rear housing, antenna, transceiver board

assembly, flip assembly cover, and camera assembly, as described in the

procedures.

2. Use the disassembly tool to unseat the display module assembly flex connector

from its socket (see Figure 21).

3. Carefully and gently lift one corner of the display module assembly out of the

flip assembly.

4. Avoid damage to the electrical components on the flex while carefully removing

the display module assembly from the flip assembly.

The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when

handling.

051353o

Figure 21. Display Module Assembly Flex Connector

Display Flex Connector

Disassembly Tool

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 67 68

No comments

Motorola V3m Service Manual Page 38