Motorola i1000 Operations Instructions download pdf (Page 68)

GETTING STARTED

i1000

DESKTOP CHARGER

The NTN8653A Desktop Rapid Charger will charge Motorola

authorized batteries listed on page 59 for the i1000. To charge a

battery, refer to Figure 3 and follow the procedure below:

Figure 3: Desktop Rapid Charger

Charging a Battery

1. Plug the ﬂat end of the power-supply cord into the receptacle on

the back of the charger.

2. Plug the transformer end of the power-supply cord into any

standard AC wall outlet. The charger performs a quick power-

up self-test, during which the LED indicators will ﬂash once to

indicate a successful power-up.

3. Insert an i1000 portable with an attached battery, into the

charger's front pocket. This is done by inserting the bottom of

i1000 portable onto the pin connector in the bottom of the

charger's front pocket.

4. If the portable is properly seated in the front pocket, the

charger’s front pocket LED indicator will light red to indicate

that the battery is being charged. (If a battery is in the rear

pocket and the portable with a battery is inserted into the front

pocket, the rear pocket’s LED ﬂashes yellow, indicating that its

battery is waiting to be charged.)

5. The charger has the capability of displaying the battery’s charge

status. The indicator will show the following: solid red=1-30%;

solid yellow=31-60%; ﬂashing green=61-90%; solid green=91-

100%.

Rear PocketFront Pocket

Pin Connector Power supply cord receptacle

LED

Indicators

Accessories

i1000 Page 63 Wednesday, June 17, 1998 1:53 PM

1 ... 67 68 69 ... 80

No comments

Motorola i1000 Operations Instructions Page 68