Motorola BLUETOOTH STEREO HEADPHONES User Manual download pdf (Page 9)

Pair the Stereo Headphones and Home Stereo Adapter

Note: Pairing is required only once for the initial setup. The Bluetooth devices retain the pairing information so it

is easy to reconnect to the last device used after you have performed the initial pairing.

1. Make sure the stereo headphones are turned off and unplugged. If the headphones are on, press and hold the

Call button for about 3 seconds until the indicator light ﬂashes rapidly and turns off.

2. Place the stereo headphones as close as possible to the home stereo adapter (about 1 - 3 inches is

recommended).

3. On the stereo headphones, press and hold Call button for about 6 seconds until the indicator light turns on and

remains steadily lit.

4. On the home stereo adapter, press and hold the pairing button for about 5 seconds until the indicator light

turns on and remains steadily lit. When pairing is successful, the pairing button on the home stereo adapter

ﬂashes rapidly and the indicator light on the headphones changes from steadily lit to ﬂashing.

Listen and Use

Play some music on your home audio system. You should hear the music on your stereo headphones.

For information on using the music controls on the stereo headphones,

visit www.hellomoto.com/bluetoothsupport.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

No comments

Motorola BLUETOOTH STEREO HEADPHONES User Manual Page 9