Motorola 2247-N8 Specifications download pdf (Page 75)

set physical dsl profile-12b [ off | on ]

Default is on.

set physical dsl profile-17a [ off | on ]

Default is on.

set physical dsl profile-30a [ off | on ]

Default is off.

set physical dsl us0 [ off | on ]

Default is on.

set physical dsl transport [ atm | ptm | auto | off ]

Sets the DSL transport mode: Asynchronous (atm), Packet (ptm), Automatic (auto), or none (off). Default is auto.

set physical dsl atm vcc 1 enable [ off | on ]

Turns atm on or off on vcc 1. Default is on.

set physical dsl atm vcc 1 aal-type [ aal5 | aal0pkt | aal0cell ]

Sets the ATM Adaptation Layer type (aal-type): AAL5, AAL0-packet, or AAL0-cell. Default is aal5.

set physical dsl atm vcc 1 datapath [ phy0fast | phy0interleaved ]

Sets the ATM datapath, Fast Path or Interleaved. Default is phy0fast.

set physical dsl atm vcc 1 encap-type [ llcsnap-eth | llcsnap-rtip | llcencaps-ppp

| vcmux-eth | vcmux-ipoa | vcmux-pppoa ]

Specifies the data link encapsulation type. Default is llcsnap-eth.

set physical dsl atm vcc 1 vpi [ 0 - 255 ]

Sets the Virtual Path Identifier (vpi) for the circuit. Default is 0.

set physical dsl atm vcc 1 vci [ 32 - 65535 ]

Sets the Virtual Channel Identifier (vci) for the circuit. Default is 35.

set physical dsl atm vcc 2 enable [ off | on ]

Turns atm on or off on vcc 2. Default is on.

set physical dsl atm vcc 2 aal-type [ aal5 | aal0pkt | aal0cell ]

Sets the ATM Adaptation Layer type (aal-type): AAL5, AAL0-packet, or AAL0-cell. Default is aal5.

1 ... 74 75 76 ... 108

No comments

Motorola 2247-N8 Specifications Page 75