Motorola Symbol LS3008 Specifications download pdf (Page 114)

8 - 2 Symbol LS3008 Product Reference Guide

1. Attach the modular connector of the IBM 46XX interface cable to the cable interface port on the scanner (see

Installing the Interface Cable on page 1-3).

2. Connect the other end of the IBM 46XX interface cable to the appropriate port on the host (typically Port 9).

3. Select the port address by scanning the appropriate bar code from Port Address on page 8-3.

4. To modify any other parameter options, scan the appropriate bar codes in this chapter.

IBM Parameter Defaults

Table 8-1 lists the defaults for IBM host parameters. To change any option, scan the appropriate bar code(s)

provided in the Parameter Descriptions section beginning on page 8-3.

NOTE Interface cables vary depending on configuration. The connectors illustrated in Figure 8-1 are examples

only. The connectors may be different than those illustrated, but the steps to connect the scanner remain

the same.

NOTE The only required configuration is the port number. Other scanner parameters are typically controlled by

the IBM system.

NOTE See Appendix A, Standard Defaults for all user preferences, hosts, symbologies, and miscellaneous

default parameters.

Table 8-1

IBM Host Default Table

Parameter Default Page Number

IBM 468X/469X Host Parameters

Port Address None Selected

8-3

Convert Unknown to Code 39 Disable

8-4

1 ... 113 114 115 ... 234

No comments

Motorola Symbol LS3008 Specifications Page 114