Motorola LS2208 Specifications download pdf (Page 51)

User Preferences 4 - 9

Timeout Between Decodes

Timeout Between Decodes, Same Symbol

This parameter sets the minimum time between decodes of the same symbol. It is programmable in 0.1-second

increments from 0.0 to 9.9 seconds. Setting this above 0.4 seconds is recommended. The default for this

parameter is 0.6 seconds.

Scan the bar code below to select a new timeout. Next, scan two numeric bar codes beginning in Numeric Bar

Codes on page D-1 that correspond to the desired timeout. Include a leading zero for single digit numbers. For

example, to set a timeout of 0.5 seconds, scan the bar code below, then scan the “0” and “5” bar codes. If an error

occurs, or to change the selection, scan Cancel on page D-3.

Timeout Between Same Symbol

Timeout Between Decodes, Different Symbol

This parameter sets the minimum time between decodes of different symbols. It is programmable in 0.1-second

increments from 0.0 to 9.9 seconds. The default for this parameter is 0.2 seconds.

Scan the bar code below to select a new timeout. Next, scan two numeric bar codes beginning in Numeric Bar

Codes on page D-1 that correspond to the desired timeout. Include a leading zero for single digit numbers. For

example, to set a timeout of 0.5 seconds, scan the bar code below, then scan the “0” and “5” bar codes. If an error

occurs, or to change the selection, scan Cancel on page D-3.

Timeout Between Different Symbol

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 344 345

No comments

Motorola LS2208 Specifications Page 51