Motorola MBP36BU User's Guide download pdf (Page 11)

Using the Baby Monitor MBP36 11

ENGLISH

3. Using the Baby Monitor MBP36

3.1 Setting up

• Place the baby unit in a convenient location (e.g. on a table) and point

the camera lens towards the area you want to monitor.

• Adjust the baby unit's head angle by rotating the camera up, down, left

and right until you are satisfied with the image in the parent unit.

NOTE

Do not place the baby unit within baby's reach! If there is interference with

the picture or sound, try moving the units to different locations, and

ensure they are not close to other electrical equipment.

3.2 Pan and Tilt

The camera can be remotely controlled from the parent unit.

1. Press the

+ UP button or - DOWN button to tilt upward or downward.

2. Press the

< LEFT button or > RIGHT button to pan left or right.

3.3 Night Vision Mode

The baby unit has 8 high-intensity infrared LEDs for picking up clear images

in the dark. When the built-in photo sensor detects a low level of ambient

light, the LEDs will automatically activate and the screen on the parent unit

will display in black and white. The

N icon will be displayed on the screen.

3.4 Talk Mode

Press and hold the T TALK button on the parent unit to talk to your baby

through the baby unit's loudspeaker. The

T icon will be displayed at the

top of the LCD screen.

3.5 Video ON/OFF

Press V VIDEO ON/OFF key to turn the LCD display on or off, but will

still leave the audio monitor on.

3.6 Temperature Display (HH ºC / ºF or LL ºC / ºF)

The temperature reading from the temperature sensor at the back of

the Baby Unit will be displayed at the top of the LCD screen. The

readings will turn RED if the temperature goes above 29ºC / 84ºF or

below 14ºC / 57ºF. The reading will change to HH ºC / ºF if the

temperature goes above 36ºC / 97ºF. The reading will change to LL ºC /

ºF if the temperature goes below 1ºC / 34ºF.

1 ... 10 11 12 ... 28

No comments

Motorola MBP36BU User's Guide Page 11