14 Parent unit settings
4.2.2 Set the timer
1. Repeat steps 1 to 3 in section 4.2.1.
2. Press
+ or - to select
SET TIMER
.
3. Press
1 and then set the number of hours (00 to 12)
using the
+ or - keys.
4. Press
1 and then set the number of minutes (00 to 59)
using the
+ or - keys.
5. Press
1 to confirm.
NOTE
When the timer period is reached, the unit will emit an alert
beep and 00:00 on the screen. You can press any button
to stop the beeps. If the timer mode was set to
ONCE
, the
timer will be cancelled, but if set to
REPEATED
, it will reset and
start another timer period.
4.3 Set the brightness
1. Press 1 to access the main menu.
2. Press
+ or - to select
BRIGHTNESS
.
3. Press
1
to enter the sub-menu to set the brightness level.
4. Press + or - to select from
LEVEL 1
to
LEVEL 5
. The
screen brightness changes as the options are selected.
5. Press
1 to confirm.
NOTE
A lower brightness level will reduce the power consumption.
4.4 Sound alert
When the sound alert is set
ON
, and the parent unit speaker
volume is off, it will cause the parent unit to beep and flash
"Sound alert" on the display, whenever the sound at the
baby unit goes above a preset threshold.
1. Press
1 to access the main menu.
2. Press
+ or - to select
SOUND ALERT
.
3. Press
1 to enter the sub-menu.
4. Press
+ or - to select
ON
or
OFF
.
5. Press
1 to confirm.
4.5 Alert tones
You can set the parent unit to give a warning when the
battery is low and/or if the radio link to the baby unit is lost.
When activated, an alert screen will be displayed on the
parent unit with an alert tone emitted simultaneously.
1. Press
1 to access the main menu.
2. Press
+ or - to select
ALERT TONES
.
3. Press
1 and + or - to select
LOW BATTERY
or
NO LINK
.
4. Press
1 and + or - to select
ON
or
OFF
for the alert
tone.
5. Press
1 to confirm.
Comments to this Manuals