Motorola LS3578 User Manual Page 37
- Page / 378
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Chapter 3 Maintenance and Technical
Specifications
Introduction
This chapter provides suggested scanner maintenance, troubleshooting, technical specifications, and signal
descriptions (pinouts).
Maintenance
Cleaning the scan window is the only maintenance required. A dirty window can affect scanning accuracy.
•
Do not allow any abrasive material to touch the window.
•
Remove any dirt particles with a damp cloth.
•
Wipe the window using a tissue moistened with ammonia/water.
•
Do not spray water or other cleaning liquids directly onto the window.
Battery Maintenance
When batteries are stored over a year, battery cell manufacturers advise that some irreversible deterioration in
overall battery quality may occur. To minimize this loss, they recommend storing batteries half charged in a dry,
cool place between 41° and 77°F (5° and 25°C), the cooler the better, and removed from the equipment to prevent
the loss of capacity. Batteries should be charged to half capacity at least once a year. In order to charge a battery
to half capacity, take a fully discharged battery and charge it for 2 hours. If an electrolyte leakage is observed, avoid
any contact with the affected area and properly dispose of the battery.
- Symbol LS3578 1
- Product Reference Guide 3
- Warranty 4
- Revision History 5
- Table of Contents 7
- Table of Contents vii 9
- Table of Contents ix 11
- Table of Contents xi 13
- About This Guide 15
- Notational Conventions 16
- Related Documents 17
- Service Information 17
- Chapter 1 Getting Started 19
- Unpacking the Scanner 20
- The Cradle 20
- Cradle Parts 21
- Connecting the Cradle 22
- Getting Started 1 - 5 23
- Supplying Power to the Cradle 24
- Mounting the Cradle 24
- Inserting the Battery 25
- Removing the Battery 26
- Scanner Charging LED 26
- Getting Started 1 - 9 27
- Configuring the Scanner 28
- Radio Communications 28
- Chapter 2 Scanning 29
- Parameter Menu Scanning 30
- Table 2-1 30
- Scanning 2 - 3 31
- LED Definitions 32
- Scanning 33
- Optimum Scan Angles 34
- Decode Zone 35
- Symbol LS3578-ER Decode Zone 36
- Specifications 37
- Troubleshooting 38
- Table 3-1 39
- Set Synapse Defaults 40
- Technical Specifications 41
- Table 3-2 42
- Table 3-3 42
- Scanner Signal Descriptions 43
- Figure 3-1 44
- Table 3-5 44
- Pin 4 Pin 3 Pin 2 44
- Table 4-1 46
- Wireless Beeper Definitions 47
- Radio Communications 4 - 5 49
- Bluetooth 50
- Technology Profile Support 50
- *General Discoverable Mode 51
- HID Host Parameters 52
- Radio Communications 4 - 9 53
- Swedish Windows 54
- UK English Windows 54
- Japanese Windows 54
- Portuguese/Brazilian Windows 54
- *Disable Keypad Emulation 56
- *Disable Function Key Mapping 57
- *Disable Simulated Caps Lock 58
- *No Case Conversion 58
- Auto-reconnect Feature 59
- Reconnect Attempt Interval 60
- Radio Communications 4 - 17 61
- Out of Range Indicator 63
- Scanner(s) To Cradle Support 64
- Radio Communications 4 - 21 65
- *Unlocked Pairing Mode 66
- Radio Communications 4 - 23 67
- Pairing Bar Code Format 68
- Radio Communications 4 - 25 69
- Set Interval to 4 Hours 70
- Set Interval to 8 Hours 70
- Set Interval to 24 Hours 70
- Set Interval to Forever 70
- Bluetooth Security 71
- PIN Code 72
- Encryption 73
- Chapter 5 User Preferences 75
- Scanning Sequence Examples 76
- Errors While Scanning 76
- User Preferences 5 - 3 77
- User Preferences 78
- Beeper Tone 79
- *High Volume 80
- *Beep After Good Decode 81
- Trigger Mode 82
- Aim Duration 83
- Beep on Insertion 83
- Transmit Code ID Character 85
- Scan Angle 85
- Prefix/Suffix Values 86
- Scan Data Transmission Format 87
- <PREFIX> <DATA> 88
- Data Format Cancel 88
- *Disable No Read 89
- Synapse Interface 90
- Batch Mode 91
- Batch Mode (continued) 92
- Report Scanner Version 93
- Report Scan Engine Version 93
- Report MIMIC Version 93
- Report Synapse Cable 93
- Table 6-1 97
- Keyboard Wedge Host Types 98
- *North American 99
- Ignore Unknown Characters 101
- Keystroke Delay 101
- Intra-Keystroke Delay 102
- Caps Lock On 103
- Caps Lock Override 103
- *Do Not Convert Wedge Data 104
- FN1 Substitution 105
- Send Make and Break 105
- Keyboard Maps 106
- NCR 7052 58-KEY 107
- ASCII Character Set 108
- Table 6-2 109
- Table 6-3 113
- Table 6-4 114
- Table 6-5 115
- Table 6-6 116
- Table 6-7 117
- Chapter 7 RS-232 Interface 119
- RS-232 Default Parameters 121
- RS-232 Host Parameters 122
- RS-232 Interface 7 - 5 123
- RS-232 Host Types 124
- RS-232 Host Types (continued) 125
- Baud Rate 125
- *Baud Rate 9600 126
- RS-232 Interface 7 - 9 127
- Parity (continued) 128
- Check Receive Errors 128
- *1 Stop Bit 129
- Hardware Handshaking 130
- RS-232 Interface 7 - 13 131
- Software Handshaking 132
- RS-232 Interface 7 - 15 133
- *Minimum: 2 sec 134
- *Host: Low RTS 135
- *Minimum: 0 msec 136
- RS-232 Interface 7 - 19 137
- ASCII / Character Set 138
- RS-232 Interface 7 - 21 139
- Table 7-4 140
- RS-232 Interface 7 - 23 141
- Chapter 8 USB Interface 143
- Connecting a USB Interface 144
- USB Interface 8 - 3 145
- USB Default Parameters 146
- USB Host Parameters 147
- USB Interface 8 - 7 149
- *No Delay (0 msec) 150
- USB Caps Lock Override 151
- USB Ignore Unknown Characters 151
- Emulate Keypad 152
- Function Key Mapping 153
- Simulated Caps Lock 153
- Convert Case 154
- Table 8-2 156
- USB Interface 8 - 15 157
- USB Interface 8 - 17 159
- Table 8-3 160
- USB Interface 8 - 19 161
- Table 8-5 162
- Table 8-4 162
- USB Interface 8 - 21 163
- Table 8-7 164
- Introduction 165
- IBM Default Parameters 167
- IBM 468X/469X Host Parameters 168
- Chapter 10 123Scan 169
- Chapter 11 Symbologies 171
- Symbology Default Parameters 172
- Symbologies 11 - 3 173
- Table 11-1 174
- *Enable UPC-A 175
- *Enable UPC-E 175
- *Disable UPC-E1 176
- *Enable EAN-13/JAN-13 176
- *Enable EAN-8/JAN-8 177
- *Disable Bookland EAN 177
- ISBN Format on page 11-19 178
- Symbologies 11 - 9 179
- Enable 491 Supplemental Mode 180
- Symbologies 11 - 11 181
- *Transmit UPC-A Check Digit 182
- *Transmit UPC-E Check Digit 183
- *Transmit UPC-E1 Check Digit 183
- *System Character 184
- Convert UPC-E to UPC-A 187
- Convert UPC-E1 to UPC-A 187
- *Disable EAN/JAN Zero Extend 188
- Bookland ISBN Format 189
- UCC Coupon Extended Code 190
- Code 128 191
- *Enable UCC/EAN-128 192
- *Enable Code 39 193
- *Disable Trioptic Code 39 193
- *Disable Code 32 Prefix 194
- Set Lengths for Code 39 195
- *Disable Code 39 Check Digit 196
- *Disable Code 39 Full ASCII 197
- *Disable Code 93 198
- Symbologies 11 - 29 199
- *Disable Code 11 200
- Set Lengths for Code 11 201
- Transmit Code 11 Check Digits 203
- Interleaved 2 of 5 (I 2 of 5) 204
- Symbologies 11 - 35 205
- *Disable 206
- Discrete 2 of 5 (D 2 of 5) 207
- Codabar (NW - 7) 209
- Set Lengths for Codabar 210
- *Disable CLSI Editing 211
- *Disable NOTIS Editing 211
- *Disable MSI 212
- Set Lengths for MSI 213
- *One MSI Check Digit 214
- *MOD 10/MOD 10 215
- GS1 DataBar 216
- *Disable GS1 DataBar Expanded 217
- Redundancy Level 218
- Redundancy Level 3 219
- Redundancy Level 4 219
- Security Level 220
- Bi-directional Redundancy 221
- Using ADF Bar Codes 224
- ADF Bar Code Menu Example 224
- Rule 2: The UPC Scanning Rule 225
- Alternate Rule Sets 225
- Special Commands 227
- Quit Entering Rules 228
- Disable Rule Set 229
- Criteria 230
- Code Types (continued) 231
- Code Lengths 234
- Code Lengths (continued) 235
- Any Message OK 239
- Numeric Keypad 240
- Numeric Keypad (continued) 241
- Rule Belongs To Set 242
- Send Data 243
- Send Data (continued) 244
- Setup Field(s) 246
- Move Cursor 247
- Send Pause 247
- Skip Ahead 248
- Skip Ahead (continued) 249
- Skip Back 250
- Send Preset Value 251
- Skip Back (continued) 251
- Modify Data 252
- Pad Data with Spaces 253
- Pad Spaces To Length 29 257
- Pad Spaces To Length 30 257
- Stop Pad Spaces 257
- Pad Data with Zeros 258
- Pad Zeros To Length 7 259
- Pad Zeros To Length 8 259
- Pad Zeros To Length 9 259
- Pad Zeros To Length 10 259
- Beep Once 263
- Beep Twice 263
- Beep Three Times 263
- Control Characters 264
- Keyboard Characters 269
- Send ALT Characters 283
- Send Alt \ 287
- Send Alt ] 287
- Send Keypad Characters 288
- Send Function Key 293
- Send Function Key (continued) 294
- Send Right Control Key 300
- Turn On/Off Rule Sets 306
- Turn Off Rule Set 1 307
- Turn Off Rule Set 2 307
- Turn Off Rule Set 3 307
- Turn Off Rule Set 4 307
- Alphanumeric Keyboard 308
- Table A-1 323
- Symbol Code Identifiers 331
- AIM Code Identifiers 332
- Programming Reference B - 3 333
- Table B-3 334
- Appendix C Sample Bar Codes 335
- 1 123 456 2 336
- 3 4567 89 012340 336
- 1234 567 0 336
- 12345ABCDE 337
- Æ1234567890Æ 337
- A1234567890A 337
- 123456789 338
- 12345678912345 338
- Appendix D Numeric Bar Codes 339
- 4, 5, 6, 7 340
- Numeric Bar Codes D - 3 341
- Alphanumeric Bar Codes E - 3 345
- Alphanumeric Bar Codes E - 5 347
- Alphanumeric Bar Codes E - 7 349
- Alphanumeric Bar Codes E - 9 351
- Alphanumeric Bar Codes E - 11 353
- Alphanumeric Bar Codes E - 13 355
- Alphanumeric Bar Codes E - 15 357
- Alphanumeric Bar Codes E - 17 359
- Glossary 361
- Glossary - 3 363
- Glossary - 5 365
- Glossary - 7 367
- Numerics 369
- Index - 3 371
- Index - 5 373
- Tell Us What You Think 375
Related products and manuals for Accessories communication Motorola LS3578
(92 pages)© 2020, manymanuals.com. All rights reserved. | 0.050 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals