Motorola RMV2080 Operations Instructions download pdf (Page 26)

GETTING STARTED

English

GETTING STARTED

SELECTING A CHANNEL

To select a channel, rotate the Channel

Selector Knob and select the desired channel

number.

Each channel has its own Frequency,

Interference Eliminator Code and Scan

Settings.

TALKING AND MONITORING

It is important to monitor for traffic before

transmitting to avoid ‘talking over’ someone

who is already transmitting.

To monitor, long press and hold the SB1(*)

button to access channel traffic. If no activity is

present, you will hear ‘static’. To release,

press SB1 again. Once channel traffic has

cleared, proceed with your call by pressing the

PTT button. When transmitting, the LED

Indicator will be On solid red during

transmission.

For the following explanations, refer to “Parts of

the Radio” on page 8.

TURNING RADIO ON/OFF

To turn the radio ON, rotate the ON/OFF/

Volume Knob clockwise. The radio will play

either one of the following options:

•

Power up tone and channel number

announcement

•

Battery level and channel number

announcement

•

Silent

The LED blinks red briefly.

To turn the radio OFF, rotate the On/Off/

Volume Knob counterclockwise until you hear

a ‘click’ and the radio LED Indicator turns OFF.

ADJUSTING VOLUME

Turn the On/Off/Volume Knob clockwise to

increase the volume, or counterclockwise to

decrease the volume.

Note: Do not hold the radio too close to the ear

when the volume is high or when

adjusting the volume

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 87 88

Comments to this Manuals

No comments

Motorola RMV2080 Operations Instructions Page 26

Comments to this Manuals

Related products and manuals for Two-way radios Motorola RMV2080